🧼 Step One - Preparation

• Place the AlphaWave™ on a flat and stable surface.
• Plug the power cable into a standard outlet.
• Lift the lid and fill the stainless steel tank with lukewarm water up to the MAX line.

⚠️ Do not operate the device without water.

🦷 Step Two - Cleaning

• Place the plate, splint, or denture in the water so that it is completely submerged.
• Cover the tank and press the power button.

 

Single press - Regular effective cleaning (3 min)

Double press - Professional effective cleaning (6 min)

💡 Note: After 30 minutes of cumulative use, the device automatically enters protection mode. Wait 15 minutes before operating again.

 

✨ Step Three - Completion and Device Cleaning

• After use, unplug the device from the power outlet.
• Lift the lid, gently remove the item, and rinse with clean water.
• Empty the water from the tank according to the arrow, wipe gently with a soft, dry cloth.
• Store the device in a dry and cool place.

⚠️ Important: Do not empty the water from the tank before unplugging the device from the power outlet.

 

💡 Tips for more effective cleaning

• You can add a few drops of mild (unscented) dishwashing liquid.

• For extra deep cleaning - you can repeat the operation as needed.

• Do not use harsh chemicals or abrasive materials.

⚠️ Warnings

• Do not wet the power button.

• Do not use hot water above 30°C.

• Do not place electronic items, coated lenses, or very delicate jewelry (such as pearls) in the device.

• Do not operate the device near a heat source or running water.

• Do not attempt to repair the device yourself.

🔎 More questions?

Our support team is here for you for any questions.