VeraWave Pro Instructions for Use

VeraWave Pro™ is designed for deep, quiet, and effective cleaning of aligners, retainers, and dentures - at the push of a button.

 

🧼 Step One - Preparation:

1. Place ™VeraWave Pro on a stable, flat surface. 
2. Connect the power cord to a standard outlet.
3. Lift the lid and fill the stainless steel tank with lukewarm water – up to the MAX fill line.

*Do not operate the device without water.

 

🦷 Step Two - Cleaning:

1. Place the aligner or retainer in the water, ensuring it is completely submerged.
2. Cover the tank and press the power button.

*Button colors will change according to the selected mode.

 

Select the desired cleaning mode:

🟢 5 Minutes - Daily Cleaning

🔵 8 Minutes - Thorough Cleaning

🟠 10 Minutes - Extra Deep Cleaning

 

Note: After 30 minutes of cumulative use, the device enters protection mode, and you must wait 15 minutes before further use.

 

✨ Step Three - Completion and Cleaning of the Device:

At the end of the operation, unplug the device.

Lift the lid, carefully remove the item, and rinse with clean water.

Empty the water from the tank following the arrow, wipe with a soft, dry cloth.

Store the device in a dry, cool place.

*Do not empty the water before unplugging the device.

 

💡 Tips for More Effective Cleaning:

• You can add a few drops of mild dish soap (unscented).
• For deep cleaning - activate the 10-minute mode; you can repeat as needed.
• Do not use abrasive materials or harsh chemicals.

 

⚠️ Warnings:

Do not wet the power button

Do not use water hotter than 30°C

Do not place electronic items, coated lenses, or very delicate jewelry (such as pearls) in the device

Do not operate the device near a heat source or running water

Do not attempt to repair the device yourself

 

🔎 Further questions?

Our support team is available for any questions you may have